GE(GENERAL ELECTRIC) WASHER/DRYER WSM2700D  » Electronics  »
5.0
1 votes
Are you familiar with this?
Feel free to rate it!
  • He has been very happy with this model for his entire family, for a lot of years

    • by covenly1
      all reviews
      G. E. offers a 27″, unitized, one piece, washer/dryer.

      The model number of this unit is WSM2700D. The washer has 3 wash cycles, one wash/spin speed, 3 water levels, and 3 wash/rinse temperatures.

      The controls are electromechanical. WSM2700DWW is the electric dryer’s model number of this unit, while WSM2780DWW is the gas dryer’s model number.

      The washer is on the bottom of this machine, while the dryer is attached, sitting


      just up high enough to allow the user to open the washer door, vertically, with room to spare. This particular washer/dryer comes in your choice of white or white! (rather like buying a Ford Model T, ‘comes in any color you like, as long as you like black!’).

      The dryer that is attached to this unit has automatic dry control. The choices for drying are: Automatic regular (the hottest ...


      • heat), automatic perm.

        press, delicate cycle, timed cycle (where you set the exact amount of minutes you want the dryer to run), and air fluff. The dryer controls are set just under the dryer section, and the exhaust is vented through the rear.

        The entire unit is 75 inches high, and 27 inches across. An LP gas supply WILL require a separate conversion kit.

        This is important to remember.

        The gas dryer does come factory equipped for 20,000 BTUs.

        This dryer comes equipped with a 4 foot flex line. My brother lives in a penthouse that only allows for a small horizontal space for his washer and dryer.

        He has been very happy with this model for his entire family, for a lot of years. Upon his approval of this washer/dryer unit, I do trust it to be a fine one!




    0
    Karen Worobec says :

    We purchased a GE 7 cycle electronic dryer at a freight damage sale. We did not receive a manual and now we can`t get the heat to work. As there is only a little dint, we don`t think there is any damage to the working parts and the problem is probably that we don`t know how to set it. Can you advise us as to how to set it please?

    ReviewStream.com
    • Don't Be Nice. Be Helpful.

    The review was published as it's written by reviewer in November, 2005. The reviewer certified that no compensation was received from the reviewed item producer, trademark owner or any other institution, related with the item reviewed. The site is not responsible for the mistakes made. 1651114180730/k2311a115/11.5.05
    Your use of this website constitutes acceptance of the Terms & Conditions
    Privacy Policy